VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Physical Description
Built-in MIC
Indented Reset Button
Image Adjustment Screw
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
4 - User's Manual
Lens
Tilt Screw
PIR Sensor
Pan Screw
1 2 3 4
Light Sensor
IR LEDs
I/O
1 2 3 4
Audio Out
Mic. In Ext. Int.
Audio Out
General I/O Terminal Block
Drill Holes
Dome Cover
1: Power
2: Digital output
3: Digital input
4: Ground
Status LED
Ethernet 10/100 RJ45 Socket
Power Cord Socket
Focus Controller
Zoom Controller
MIC In
External/Internal MIC Switch
Keep a note of the MAC address
before installing the camera�
Network Camera
RoHS
C I
Model No: FD7132
MAC:0002D107258A
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
Pat. 6,930,709