Table of Contents
Advertisement
Network
This section explains how to configure wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network (LAN) and is intended
to be accessed by local computers� The default setting for the Network Type is LAN� Rememer to click
Save when you complete the Network Settings�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by
the DHCP server each time the camera is connected to the LAN�
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera�
1. You can make use of VIVOTEK installation wizard 2 on the software CD to easily set up the Network
Camera on LAN� Please refer to Software installation on page 12 for details�
2� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�
Enable UPnP presentation: Select this option to enable UPnP
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently,
TM
UPnP
is supported by Windows XP or later. Note that to utilize this feature, please make sure the
TM
UPnP
component is installed on your computer�
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
TM
presentation for your Network Camera
User's Manual - 33
Advertisement
Table of Contents
