System Tools; Reboot - 3Com OfficeConnect 3CRWE454A72 User Manual

44 C 4: A P C
HAPTER CCESS OINT ONFIGURATION

System Tools

Reboot

Figure 25 Reboot Screen
If your Access Point is not operating correctly, you can choose to restart
the Access Point by selecting Reboot the Access Point and then clicking
Apply, simulating the effect of power cycling the unit. No configuration
information will be lost but the log files will be erased. Any network users
who are currently connected to the Access Point will have their access
interrupted whilst the restart takes place, and they may need to reboot
their computers when the restart has completed and the Access Point is
operational again.