Table of Contents
Advertisement
Windows 95/98/Me/2000 users will install the software and then
the hardware (the PCI card). Windows NT users will install the
hardware and then verify they have Remote Access Service (RAS)
before putting the installation CD-ROM in the drive and running the
Setup program. Instructions which pertain only to NT 4.0 users are
flagged with the symbol:
Warning for Windows NT users: Before installing your
ADSL modem on Windows NT, please be sure you have
installed at least Service Pack 4 or higher from Microsoft.
DO NOT install the modem unless you have done this. You
can obtain Service Pack 4 or higher from Microsoft, free
of charge, from their Web Site:
If you are an NT user who is configured for PPP access
and will be installing Remote Access Service, you may be
required to insert your Windows NT System CD-ROM to
copy files, so you should have this handy before starting.
Make sure you have shut down and unplugged your computer.
Remove the cover from your computer. Refer to the manual that
came with your computer if you need instructions for your model.
www.microsoft.com
Advertisement
Table of Contents
