52
C
5: C
HAPTER
ONFIGURING THE
Advance
R
OUTER
3 Click Add to add the MAC address of the AP to the list, the add WDS
screen will appear (refer to
Figure 41 Add WDS screen
Enter the MAC address(es) of one or more access points in the AP MAC
Address table, and click Apply.
The Advance screen allows you to configure detailed settings for your
wireless connection.
Figure 42 Wireless Advanced Setting screen
There are six parameters that you can configure:
Beacon Interval: this represents the amount of time between beacon
■
transmissions.
Figure
41).