Tool Menu; Reset; Configure Backup & Restore; Firmware Backup And Upload - D-Link Web Smart DES-1228P User Manual

5 Configuration

Tool Menu

The Tool Menu offers global function controls such as Reset, Configuring Backup and Restoration, Firmware
Backup and Upload, and System Reboot.

Reset

Provide a safe reset option for the Switch. All configurations will be reset to default. Click Factory Reset to
restore the settings to default values.
Configure Backup & Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary, to
be restored from a backup.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.

Firmware Backup and Upload

Allow for the firmware to be saved, or for an existing firmware file to be uploaded to the Switch.
Click Backup to save the firmware to your disk.
Click Browse to browse your inventories for a saved firmware file.
Click Restore after selecting the firmware file you want to restore.
Figure 32 – Tool Menu
Figure 33 – Tool Menu > Reset
Figure 34 – Tool Menu > Configure Backup and Restore
Note: To restore the configuration the
switch will restart
configurations will be lost
Figure 35 – Tool Menu > Firmware Backup and Upload
CAUTION: Do not disconnect the PC or remove
the power cord from device until upgrade
complete. Switch may crash if Firmware upgrade
incompletely.
2 2
2 2
D-Link Web Smart Switch User Manual
and all current