Frequently Asked Questions - Miele T 8002 VENT ED DRYER Operating And Installation Manual

Frequently asked questions

What if the dryer will not run?
Possible fault
The "Start/Stop" button was not
pressed.
The circuit breaker tripped or
the dryer is unplugged.
The door is not closed.
How do I prevent static cling?
Add fabric softener to laundry when washing or select the "Less Dry" setting on
the dryer.
What if the drum light does not come on?
Possible fault
The bulb may be bad or burned
out.
What if the "Child Lock" indicator flashes after turning the dryer on and a
program cannot be started?
Possible fault
The child lock is activated.
What if the program stops, the "Anti-crease / End" indicator lights and the
buzzer sounds?
Possible fault
The drum is empty.
What if the "Filter/Vent" fault indicator is lit?
Possible fault
The lint filter is clogged.
The exhaust hose or the
connection is clogged with lint.
The air supply in the room is
insufficient.
18
Solution
Make sure the dryer is on. Press the "Start/
Stop" button to begin the drying program.
Make sure the dryer is plugged in or reset the
circuit breaker.
Close the door properly.
Solution
See "Changing the light bulb."
Solution
Deactivate the child lock. See "Child Lock."
Solution
Load laundry into the dryer. The dryer will not
operate if the drum is empty. Single items
should be dried with "Sturdy" or a timed
program. For dry items use the "Fluff" program.
Solution
Clean the lint filters. See "Dryer care".
Remove lint and check the exhaust system for
blockages.
Open a window or door to increase airflow.