Linksys WAP54G Quick Installation Manual page 6

C. You can configure the Access Point through any PC connected to your
Ethernet network. Make sure the Access Point is connected to one of your
network switches or hubs. Click the Next button.
C
D. The next screen will display a list of access points on your network, along
with the status information for each access point. If there is only one access
point on your network, it will be the only one displayed. If there are more
than one displayed, select the Access Point by clicking on it, and then click
the Yes button.
D
6
Instant Wireless® Series Wireless-G Access Point
E. On the Enter
Network Password
screen, enter the
default password,
admin, in the
Password field.
Then click the OK
button. For added
security, remember
to change this
password later
through the Web-
E
based Utility's
Password screen.
F. The IP Settings
screen will appear.
Enter an IP Address
and Subnet Mask
appropriate to your
network. Then enter
a unique name in
the AP Name field.
Click the Next
button.
F
G. The Basic Settings
screen will appear.
Enter your wireless
network's SSID,
and select the
channel at which
the network
broadcasts its
wireless signal.
Then click the Next
button.
G
7