D-Link Router DI-3660 Installation Manual page 22

DI-3660 Router
3. Refer to the following figure to find the location of Flash Memory slot and switch on DI-3660
4. If there is a Flash Card in the slot already, you should uninstall the existing Flash Card first. Push the spring handle of Flash
Memory slot with your fingers as in the direction of arrow 1, and the Flash Card in the slot will spring out, then you can take
out Flash Card in the direction of arrow 2;
5. Identify the edge with the female connectors on the new Flash Card. Insert the Flash Card with this edge going f irst into the
Flash memory slot (see the following figure below for side view of the Flash Card).
Note: If the Flash Card doesn' t enter into the Flash memory receptacle, don' t push it in by force. Take out Flash Card
and try again with the other side upwards.
6. Push Flash Card into Flash memory receptacle horizontally as shown in the figure below:
7. Find the location of the switch in the figure showing the location of the Flash memory slot and put ON switch #2.
8. After you finish installation, please follow the steps of " Close the case" as shown in Router Maintenance Section.
__________________________________________________________________________________________________________________
22