D-Link Router DI-3660 Installation Manual page 12

DI-3660 Router
Description of the Components on the Rear Panel of the Router:
The following table describes the components on the Router' s panel:
No Name
1 Power
2 Console
3 AUX
4 Ready1
5 Active1
6 Ready2
7 Active2
8 Ready3
9 Active3
10 Ready4
11 Active4
12 Ready5
13 Active5
14 Ready6
15 Active6
16 SLOT1
17 SLOT2
18 SLOT3
19 SLOT4
20 SLOT5
21 SLOT6
22 Power Switch
23 Power Input
__________________________________________________________________________________________________________________
The device is powered ON
Connected to the monitored terminal through this port to monitor and configure
Connected to asynchronous Modem through this port; and the port uses the
specified communication cable.
LED ON when system has self-checked successfully.
LED ON when interface card and module is inserted in the slot.
LED ON system has self-checked successfully.
LED ON interface card and module is inserted in the slot.
LED ON when system has self-checked successfully.
LED ON when interface card and module is inserted in the slot.
LED ON when system has self-checked successfully.
LED ON when interface card and module is inserted in the slot.
LED ON when system has self-checked successfully.
LED ON when interface card and module is inserted in the slot.
LED ON when system has self-checked successfully.
LED ON when interface card and module is inserted in the slot.
Network interface modules slot.
Network interface modules slot.
Network interface modules slot.
Network interface modules slot.
Network interface modules slot.
Network interface modules slot.
Press upwards to turn the Router ON, press downwards to turn it OFF
AC110～ 220V
Description
12