Filters - D-Link DSL-G624T User Manual

Community
Traps

Filters

Filter rules in the Router are put in place to allow or block specified traffic. The Filter Rules however can be used in a
single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN)
routed data. The rules are based on IP address and TCP/UDP port.
Configure the filter rules as desired and click the Apply button to create the rule. The newly created rule appears listed
in the Outbound Filter List at the bottom of the window. The table below describes the various parameters that are
configured for the filter rules.
DSL-G624T Wireless ADSL Router User Guide
Use this edit client community for server SNMP access.
•
Name: Edit community Name.
• Access Right: Access Right may choose ReadOnly or ReadWrite.
The management agent can send an event notification to the management
system to identify the occurrence of conditions such as threshold that
exceeds a predetermined value.
• Destination IP: Insert destination IP address to launch trap
message.
• Trap Community: Insert Trap Community name.
• Trap Version: Drop-down menu allows you to select SNMP v1 or
SNMP v2c.
Filters window
14