D-Link DSL-504 User Manual page 36

DSL-504 ADSL Router User's Guide
In the page that opens, click on the Login to web-based management module
button:
A new window will appear and you will be prompted for a user name and
password. Use default user name admin and password admin for first time set
up.
Logging in will bring up the PPPoE Configuration window of the web-based
management module. Click the DSL-504 folder located below the D-Link logo in
the upper left corner. The folder will open revealing the management menu
option buttons. If this is the first time the Web Manager is used, the options will
be listed as follows: PPPoE Configuration, DHCP Configuration, NAT
Configuration, Port Redirection, Advanced Filter/Firewall, Connection
Type, OAM Loopback Test, Line Condition, User Name and Password,
Save Changes, Update Firmware and Summary. The first menu item may
read PPPoA Configuration or Static IP Address Configuration if the device
has been configured for these connection types. The various management options
are explained in the following sections. To access any of the option menus click on
the appropriate option button.
28
Login Button
User Login
Click on the D-Link DSL-504
folder to open it.
Open any of the Web Manager
options by clicking on the
corresponding button.