Additional Requirements; Pc Workstation Requirements; Operating System; Web Browser - D-Link DSL-504 User Manual

Adsl router

Hide thumbs Also See for DSL-504:

Table of Contents

DSL-504 ADSL Router User's Guide

Additional Requirements

You will need a PC (referred to in this guide as the Manager PC) to set up and

use the Router. In addition, it will be necessary to configure the device using

information provided by your ADSL service provider. This information is used to

establish the parameters of the ADSL connection and identify the Router on the

WAN. The requirements for the PCs on your LAN are summarized below.

You can use the Router with PCs that meet the conditions discussed here.

The embedded web-based management utility can be used through any TCP/IP

enabled computer that has web browser software installed.

Any common web browser such as Microsoft Internet Explorer or Netscape

Navigator can be used to configure the Router using the embedded web-based

management software.

All PCs using the Router for Internet access, including the Manager PC, must

have an Ethernet NIC (Network Interface Card) installed. Each computer on the

internal network must have TCP/IP Protocol enabled. If you have an existing

Ethernet set up, the PCs should already meet this requirement.

Each ADSL client on a DSL network has a unique integer pair used by the DSL

network managers to provide dedicated bandwidth on the ATM network

backbone. This pair of numbers is sometimes called the VPI/VCI pair.

The Virtual Path Identifier (VPI) and a Virtual Channel Identifier (VCI)

must be entered during the configuration process.

ADSL SETTINGS

VPI value:

VCI value:

Table of Contents