D-Link DI-713P User Manual page 18

In order to configure your Broadband Router you must input the
administrator password into the System Password box and press the Log in
button. The default System Password is admin.
Once you have logged-in as administrator, it is a good idea to change
the administrator password to insure a secure connection to your
Broadband Router. The Tools section described later in this manual
describes how to change the password.
Once you have input the correct password and logged-in, the screen
will change to the Device Information screen.
If you are having problems logging in and you are sure that the
password you are using is correct, check the top right-hand corner of your
keyboard to make sure that the Caps Lock light is not on. Otherwise, refer
to Appendix A to reset the password.
18