Runtime Tables; Ip Routing Table - D-Link DI-308 User Manual

D-link isdn router user's guide
Table of Contents

Advertisement

DI-308 ISDN Remote Router
misaligned packet will generate a single NOA event regardless of the number of
misaligned octets in the packet.
Rx Abort Packet – The number of packets that were dropped due to user
generated breaks in the transmission that occurred while a packet is being
received.
Rx CRC Packets – The number of packets received that failed the CRC
checksum test.
Rx Overrun Packets – The number of packets received that exceed the 1518
octet maximum length imposed on Ethernet packets. Overrun packets are
generated by some proprietary software applications.
Rx CD Lost Packets – Carrier Detect Lost. This counts the number of Carrier
Detect packets that were lost by the router.
Rx Framing Err Packets – Packets with framing errors can occur on the ISDN
port only when using HDLC in sync mode. This parameter counts the number of
lost start/stop flags.
Rx Parity Err Packets – The number of times parity errors occurred on the line.

Runtime Tables

There are three types of runtime tables maintained by the DI-308:

IP Routing Table

The IP Routing Table gives you a snapshot of the IP routing table. Table entries will
expire after the Age value in the table counts down to zero seconds (except for
entries for the router itself which have an age value of zero but will never expire).
80

Advertisement

Table of Contents
loading

Table of Contents