Isdn - D-Link DI-308 User Manual

DI-308 ISDN Remote Router

ISDN

The parameters are described below:
Description – This is a user-defined, 32-character identifier used to name the
ISDN.
Switch Type – This parameter defines the type of ISDN service used. Currently,
the DI-308 only supports DSS-1 type ISDN lines.
B1 and B2 Channel Usage – This defines whether the ISDN line is a leased line
or a normal switched line. If you are not using a leased line connection, set this
item to Switch.
Country ID – This field needs to contain the country parameter. Without this
information, the router cannot establish a connection. A list of country ID
numbers is located in Appendix E, "Country ID Numbers."
ISDN Data – This field must contain the incoming telephone number for data
calls. In other words, it is your ISDN line's data phone number.
A/B Adapter 1 and 2 – Enter the telephone numbers for your voice/analog lines.
Phone 1 and 2 Call Waiting – If you have applied for and received call waiting
capabilities for your ISDN voice lines, you must enable these settings in order for
the call waiting feature to function.
There are four special operations for using call waiting (flash means a very brief
hanging up of the phone. In other words, for the first option below, flash 0, click
the hang up button on your phone very quickly and then press the number 0 on
your telephone's keypad):
20