Each decision on handling packets is described below:
1. Disable – Will not apply a filter.
2. Forward – This allows the routing of a packet, even though it has not met the
3. Drop – This drops (doesn't allow routing for) a packet that has not met the
Layer 2 Filter
The Layer 2 Filter submenu contains a protocol independent (data-link layer) filter.
Foreknowledge of the specific protocol used on the interface (LAN or WANs) is
needed to make effective use of this filter.
Highlight the desired entry on the Layer 2 Filter screen:
criteria of the corresponding filter.
criteria for the corresponding filter.
49
DI-308 ISDN Remote Router