User-Defined Keys; Compatibility Of Created Data - Yamaha M7CL Supplementary Manual

Recall Safe settings made independently
for the attenuator
Recall Safe for the attenuator can now be selected inde-
pendently of EQ.
In addition, the stereo, LINK, RECALL SAFE, and USER
LEVEL behavior of other mixing parameters has also
been changed. For details, refer to the "Mixing parameter
operation applicability" on the back of the included block
diagram.
Assigning user-defined keys from
M7CL V2 Editor
M7CL V2 Editor now allows you to make the same user-
defined key settings as on the console itself. For details on
how to make these settings, refer to the M7CL V2 Editor
Owner's manual.
Functions that can be assigned to
user-defined keys
PARAME-
Function
TER 1
MONI- STEREO LATCH
TOR ON MASTER
MASTER
(FADER
ASSIGN
MODE)
UNLATCH
MONO LATCH
MASTER
UNLATCH
SENDS MATRIX
ON 1-8
FADER
MIX ON
FADER
MATRIX ON
FADER
SENDS ON
FADER
M7CL LIBRARY INPUT CH
EDITOR
CON-
TROL
OUTPUT
CH
HOME SELECTED
CH VIEW
OVERVIEW
MOMEN-
TARY

Compatibility of created data

Data created with firmware 2.0 (scenes, library data, setup
data, etc.) cannot be loaded into an M7CL console that is
using firmware V1 (any version prior to V2.0). However,
data created on an M7CL with firmware V1 can be loaded
into an M7CL that is using firmware V2.0.
7
PARAME-
Explanation
TER 2
The key will switch
whether the STEREO
MASTER fader will be
used to control the moni-
tor level
The STEREO MASTER
fader will be used to con-
trol the monitor level
while the key is held
down
The key will switch
whether the MONO
MASTER fader will be
used to control the moni-
tor level
The MONO MASTER
fader will be used to con-
trol the monitor level
while the key is held
down
Switches the MATRIX
ON FADER function on/
–
off for the selected
MATRIX
Switches the MIX ON
–
FADER function on/off
Switches the MATRIX
ON FADER function on/
–
off
Switches the SENDS ON
–
FADER function on/off
Opens the M7CL V2 Edi-
tor's Library window -
INPUT CH tab
Opens the M7CL V2 Edi-
tor's Library window -
OUTPUT CH tab
Displays the SELECTED
–
CHANNEL VIEW screen
Displays the OVERVIEW
–
screen
Each press of the key will
alternately display the
SELECTED CHANNEL
–
VIEW screen and the
OVERVIEW screen