Clear All - Yamaha LS9-16 Owner's Manual

A Link buttons
Here you can select the link group (A–Z, a–h) to which each input channel will be assigned. If you don't want an
input channel to be linked, select NONE. You can assign up to 32
groups for ST IN CH.
(*)
During offline editing when LS9-16 is selected in the Model Select field of the Mixer Setup window, or during online editing with
the LS9-16 connected, up to sixteen groups can be assigned for INPUT CH 1–32, and you'll be able to choose from link groups A–R.
B

CLEAR ALL

Clears the link settings for all channels.
C LINK PARAMETER
Here you can select the parameters that will be linked for operation.
HA Head amp gain and phantom power settings
EQ Equalizer settings
DYNAMICS1 Dynamics 1 settings
DYNAMICS2 Dynamics 2 settings
MIX ON MIX SEND on/off
MIX SEND Send amount from input channel to MIX bus
FADER Fader level value
CH ON Input channel module output on/off
D
SEND PARAMETER
Specify the link status for each MIX SEND bus.
(*)
groups for INPUT CH 1–64, and up to two
66 LS9 Editor Owner's Manual