Scene Memory - Yamaha LS9-16 Owner's Manual

❏ SCENE MEMORY
1
2
3
4
5
6
❏ Layer Keys
3 7 7 4
1
2
5
6
9
J K 8
B [RE SYNC] button
Clicking this button opens the Synchronization dialog box.
This has the same function as [Synchronization] menu ➔ [Re-Synchronize]. (➥ p.8)
Here you can view the currently-recalled scene, and recall or store scenes.
A
Scene number display
Indicates the number of the scene that is selected for store or recall.
BProtect indicator
A lock icon is shown for scene memories that are protected. Read-only scene memories
are indicated by "R" displayed.
CEdit indicator
The edit indicator will light when you edit the parameters after recalling a scene.
D [STORE] button
This button stores the current scene into the number shown by the scene number dis-
1
play ( ).
E [▲]/[▼] buttons
These buttons increment or decrement the number shown in the scene number display
1
( ). The scene number display (
while blinking will not match the scene number indicated on the LS9.
F [RECALL] button
This button recalls the scene of the number shown in the scene number display (
These keys open the respective Overview window.
These are not linked with the layer section on the LS9's panel.
NOTE
A
[1-16] button
Opens the INPUT CH 1–16 window.
B
[17-32] button
Opens the INPUT CH 17–32 window.
C
[33-48] button
Opens the INPUT CH 33–48 window.
This is available only if you're editing offline and have selected LS9-32 in the Model
Select field of the Mixer Setup screen, or if you're editing online with the LS9-32 con-
nected.
D [49-64] button
Opens the INPUT CH 49–64 window.
This is available only if you're editing offline and have selected LS9-32 in the Model
Select field of the Mixer Setup screen, or if you're editing online with the LS9-32 con-
nected.
E [MIX] button
Opens the MIX window.
F [MATRIX] button
Opens the MATRIX window.
G [STEREO] button
Opens the STEREO/MONO window.
1
) will blink until you actually store or recall, and
11
1
).
LS9 Editor Owner's Manual