DME-N Network Driver
To operate your Yamaha hardware from your computer via Ethernet, you'll need to install the DME-N Network Driver
software.
DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the
hardware via Ethernet cable.
Connection of computer and the LS9
Connect the computer to the LS9 by using an Ethernet cable via a network switch. When you connect the computer
to the LS9 directly, you can use either a crossover or straight cable.
Ethernet cable
Ethernet cable
Network switch
Editor
or
Ethernet cable
Driver
Computer
LS9
Minimum System Requirements
DME-N Network Driver applies to the system requirements of LS9 Editor. Refer to the LS9 Editor Installation Guide
for details.
3
DME-N Network Driver Installation Guide for LS9