Connecting To Dual Isps - D-Link DI-304 User Manual

IP Address Assignment Method (IPCP)
Dialing to Dual ISPs
Most configuration parameters are the same as last section. This page provides an
"Enable Dual ISPs Function" check box and adds a secondary ISP Setup section.
Check the box and enter the second ISP information.
ISP Access Setup
PPP/MP Setup
◊ PAP or CHAP - Set the PPP session to use the PAP or CHAP
protocols to negotiate the username and password with the ISP.
♦
Idle Timeout – Idle timeout means the router will disconnect after being
idle for a preset amount of time. The default is 180 seconds. If you set the
time to 0, the ISDN connection will remain always connected to the ISP.
♦
Fixed IP and Fixed IP Address – In most environments you should not
change the default settings as most ISPs provide a dynamic IP address for
the router when it connects to the ISP. If your ISP provides a fixed IP
address, check Yes and enter the assigned IP address in the Fixed IP
Address field.
♦
ISP Name – Enter the Internet Service Provider Name.
♦
Username – Enter the username obtained from your ISP provider.
♦
Password – Enter the password obtained from your ISP provider.
♦
Link Type – You have three selections:
31
DI-304/DI-304M ISDN Remote Router