Configuring Isdn Dial Backup - D-Link DI-304 User Manual

Access Control
ISDN Dial Backup Setup
Note: The router should be restarted to allow the settings to take effect.

Configuring ISDN Dial Backup

♦
Broadband Access – Select Enable to turn on the broadband access
capability.
♦
Gateway IP Address – Enter the IP address from DSL service provider
as Router IP address or the fixed IP gateway IP address.
♦
Dial Backup Mode – Select None to disable this feature or select Packet
Trigger to activate this feature, or select always on to recover connection.
♦
ISDN Dial Backup Setup – There are three options:
◊ None - Disable the backup function.
◊ Packet Trigger - The backup line is disconnected until a packet
from a local host triggers the router to establish a connection.
◊ Always On - If the broadband connection is no longer available,
the backup line will automatically connect and stay Always On until
the broadband connection is recovered.
37
DI-304/DI-304M ISDN Remote Router