Fan Operation - Haier HSU-12CR03-Y - annexe 1 Operation Manual

Operation
Display board
Remote controller
FRESH
POWER/SOFT
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select FAN operation
3.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
4.Unit stop
Press ON/OFF button, the unit stops.
About FAN operation
In FAN operation mode, the unit will not operate in
COOL mode but only in FAN mode ,AUTO is not
available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.
12

Fan Operation

AUTO COOL DRY
LOW
MED
FAN HEAT
HI