Other Features In The Song Mode - Akai MPC1000 Operator's Manual

Song mode

Other features in the SONG mode

Changing the song name
01. In the Song field of the SONG page, select a song that you wish to change the name of.
0 2 . P r e s s t h e [ W I N D O W ] k e y .
The Song window will open.
03. In the Song name field, enter the new name.
For more information for setting the name, see the "Setting names" section on Page 8.
04. Press the [F4] (CLOSE) key.
It closes the window and goes back to the SONG page.
Copying a song
To copy a song to another song, proceed as follows.
01. In the Song field of the SONG mode, select a song that you wish to copy.
0 2 . P r e s s t h e [ W I N D O W ] k e y .
The Song window will open.
0 3 . P r e s s t h e [ F 5 ] ( C O P Y ) k e y .
The Copy Song window will open.
04. In the Song field (below), select a song that you wish to copy the selected song to.
05. Press the [F3] (DO IT) key.
The MPC1000 will start copying the song. To cancel the operation, press the [F4] (CANCEL) key instead.
Deleting a song
To remove the selected song from the memory of MPC1000, proceed as follows.
01. In the Song field of the SONG mode, select a song that you wish to delete.
0 2 . P r e s s t h e [ W I N D O W ] k e y .
The Song window will open.
03. Press the [F2] (DELETE) key
The Delete Song window will open.
04. Press the [F5] (DO IT) key.
This deletes the selected song and changes its name to "unused".
Deleting all the songs
You can delete all the song data in the memory at one time. Proceed as follows.
01. In the SONG mode, select the Song field and press the [WINDOW] key.
The Song window will open.
02. Press the [F2] (DELETE) key.
The Delete Song window will open.
03. Press the [F3] (ALL SG) key.
The Delete ALL Songs window will open.
04. Press the [F5] (DO IT) key.
All the songs will be titled (unused).
-38-