Events - Akai MPC1000 Operator's Manual

[F1] (T.C.) key
This key works the same as the [F1] (T.C.) key in the MAIN page. You can set the timing correction. For more
information, see the "Timing correct feature" section on page 13.
[F2] (TRACK) key
Pressing this key displays the window to change tracks until you release the key. You can select a track
without switching back to the MAIN page.
[F6] (PLAY) key
Pressing this key plays back the selected event.
Editing method
In the step edit page, the events in the track are listed. You can select the event with up/down cursor keys and
the field with right/left cursor keys. You can change the value in the field by turning the DATA wheel.

Events

Pad event
This is the event that is recorded when you hit the pads in the DRUM track.
P (pad) field
You can set the pad number in this field.
Note variation field
In the above picture, the area that displays "T" is the note variation field. You can select the type of note
variation data to record with the Q-Link sliders.
T Tune (pitch)
F Filter
L Layer
A Attack time
D Decay time
About the note variation
Note variation data, which is used for the Q-Link sliders or 16LEVELS function, is the information used to
control the sound of a pad, and is saved in the track along with the pad event. With the note variation data, you
can switch the sounds of the pad even when you are playing back the same pad.
Note variation value field
In this field, displayed to the right of the note variation field, you can set the note variation value.
D (duration) field
You can specify the length of a note.
V (velocity) field
You can set the velocity of the pad.
Step editing
-31-