D-Link AirPro DWL-6000AP Manual page 5

The DWL-6000AP is compatible with most popular operating systems, including
Macintosh, Linux and Windows, and can be easily integrated into a large network.
This Manual is designed to help you connect the Access Point with the D-Link
2.4GHz AirPlus or 5GHz AirPro Wireless Adapters into an existing network.
Please take a look at the Getting Started section in this manual to see an example
of an Infrastructure network using the DWL-6000AP.
Connections
MDI RJ-45 Ethernet Port
•
Straight-Through
connecting to a router or switch
•
Cross-Over
computer
Features & Benefits
Supports 802.1x Authentication when used with EAP-MD5 or EAP-TLS
Supports Data Transfer Rates of up to 108 Mbps at 5GHz in Turbo mode
Supports Data Transfer Rates of up to 22 Mbps at 2.4GHz with D-Link AirPlus
products
Wireless Range of up to 900 feet*
Fully 802.11a and 802.11b compatible
Supports up to 256-bit WEP Encryption at 2.4GHz and up to 152-bit with
Enhanced Dynamic Keying at 5 GHz
Less Interference with a total of Eleven Non-Overlapping Channels
Utilizes Direct Sequence Spread Spectrum (DSSS) and Packet Binary
Convolutional Code (PBCC) at 2.4GHz
Utilizes Orthogonal Frequency Division Multiplexing (OFDM) at 5GHz
*Architectural and environmental factors may adversely affect range.
cable is required when
cable is required when connecting directly to an ethernet adapter on a
Reset
Power Receptor
5