D-Link AirPro DWL-6000AP Manual page 17

Using the Configuration Menu
Fragment Length:
experience a high packet error rate, you may slightly increase your Fragmentation
Threshold within the value range of 256 to 2346. Setting the Fragmentation
Threshold too low may result in poor performance.
RTS Length: This value should remain at its default setting of 2346. If you encounter
inconsistent data flow, only minor modifications to the value range between 256 and
2346 are recommended.
RTS Length: This value should remain at its default setting of 2346. If you encounter
inconsistent data flow, only minor modifications to the value range between 256 and
2346 are recommended.
Transmit Power:
the distance of the signal for security purposes.
Advanced > Filters > Wireless Access Settings
Select the Wireless Band (802.11a or 802.11b)
At the Access Control pull-down menu, select Disabled (the default setting,)
Accept or Reject.
Input up to 16 MAC Addresses in the Access Control List. The devices with the input
MAC Addresses will be accepted or rejected from the selected wireless band.
MAC Address (Media Access Control Address)
A unique hardware address that identifies a device on a network. It is assigned at
the factory and cannot be changed. Usually you will find this address on a sticker
on the device or on the packaging. (Please use the following format when entering
the MAC address- xx:xx:xx:xx:xx:xx)
This value should remain at its default setting of 2346. If you
Choose Full, 1/2, 1/8, or minimum Power. You may wish to limit
17