D-Link AirPro DWL-6000AP Manual page 12

Getting Started
Please refer to the following
sections of this manual for
additional information about
setting up a network:
Networking Basics - learn
how to check and assign your
IP Address; share printers and
files.
Using the Configuration
Menu - learn the settings for
the DWL-6000AP, using the
web-based interface.
Troubleshooting - learn how
to check for common
installation issues and other
tips for troubleshooting.
Please remember that D-Link AirPro wireless devices are pre-configured to connect
together, right out of the box, with the default settings.
For a typical wireless setup at home (as shown above,)
You will need a broadband Internet access (Cable/DSL) subscription
Consult with your Cable/DSL provider for proper installation of the modem
Connect the modem to an Ethernet broadband router such as the
DI-604 (see the Quick Installation Guide included with the DI-604.)
Connect the router to the D-Link AirPro DWL-6000AP (see the Quick
Installation Guide included with the DWL-6000AP.)
If you are connecting a desktop computer in your network, you can install the
D-Link AirPro DWL-A520 wireless PCI adapter into an available PCI slot.
(See the Quick Installation Guide included with the DWL-A520.)
Install the drivers for the wireless cardbus adapter (D-Link AirPro DWL-A650)
into the laptop computer (see the Quick Installation Guide included
with DWL-A650.)
2
4
6
please do the following:
1
3
5
12