Auxiliary Functions; Starting The Programme; Progressing A Programme - Beko WM5101 Installation & Operating Instructions And Washing Guidance

Auxiliary functions

Auxiliary function selection keys
• Desired auxiliary function depending
on the programme is selected.
• Some combinations cannot be
selected together.
• Warning signal on the selected
auxiliary function will light up.
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
Auxiliary function that is not compatible
with the programme cannot be selected.
(see, "Programme Selection Table")
Pre-wash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and time.
Pre-wash without detergent is
recommended for lace and curtains.
Less detergent should be put in the
main wash compartment as loose
knit fabrics (lace) foam too much
due to its meshed structure.
Extra Rinse
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins' risk of being affected by
the remainder detergent on the clothes
will be decreased.
Rinse hold
If you do not want to unload your
clothes immediately after the cotton,
synthetics, woolen and delicate fabrics
programme, you may release your clothes
inside the machine in the last rinsing
water by pressing the rinse hold button
in order to prevent your clothes become
wrinkled. After this process you may
spin your laundry by pressing "Start/
Pause/Cancel" button or you may end
the programme by pressing "Start/Pause/
Cancel" button for 3 sec.
•
In the machines equipped with spin
speed selection knob or button, you
can spin by selecting the desired
spin speed and press "Start/Pause/
Cancel" button.
•
As for machines not equipped with
a spin speed selection knob, you
can end the programme without a
spin cycle by pressing the "Start/
Pause/Cancel" button and draining
the water. If you wish your clothes
be spun, you can spin them by
selecting "pump+spin" programme.
Spin speed reduction
You may use the speed reduction
button whenever you wish to spin
your clothes below the maximum spin
speed. When speed reduction button
is pressed, spin speed will be at the
minimum rpm given on the panel.
No spin
You may use this programme if you do
not want to spin your clothes at the end
of cottons, synthetics, woolen or delicate
programmes.

Starting the Programme

1. Press "Start/Pause/Cancel" button
to start the programme.
2. "Start/Pause/Cancel" button will
light up to indicate that the programme
has started.
3. The door is locked and the "wash"
light will illuminate.

Progressing a programme

Progress of a running programme is shown
through the programme follow-up indicator.
•
At the beginning of every programme
step, the relevant indicator lamp will
light up and light of the completed
step will turn off. The symbol that is
lit up at the far right of the series of
symbols indicates the step that is
being carried out.
18
EN