Copying From The Hdd Onto A Cd-R Or Cd-Rw Disc - Yamaha CDR-HD1000 Owner's Manual

BASIC COPYING OPERATION

Copying from the HDD onto a CD-R or CD-RW Disc

NATURAL SOUND HDD/CD RECORDER CDR–HD1000
POWER
HDD CDR COPY
PHONES LEVEL
MIN MAX
<Preparing a CD-R or CD-RW disc>
1.
Press v (OPEN/CLOSE on the remote control) to
open the disc tray.
2.
Load a new CD-R or CD-RW disc, or a CD-R or CD-
RW disc without finalization on the disc tray.
Place the CD-R or CD-RW disc correctly aligned in the
recessed area of the disc tray with its recordable side facing
down.
3.
Press v (OPEN/CLOSE on the remote control) to
close the disc tray.
Note
• The disc tray can be also closed by pressing the front edge of
the disc tray gently. If a CD-R or CD-RW disc without
finalization is loaded, this unit starts playback of that CD-R
or CD-RW disc. Press a to stop playback.
This unit starts reading the disc information (type and capacity
of the disc) when a disc is loaded. It takes approximately 10 to
15 seconds to complete reading.
The following message appears on the display during reading.
24
E-
2 1, 3
TEXT/TIME
TRACK NO.
BOOKMARK
REC FINALIZE ERASE
L GROUP
dB –30 –10 –6 –2 0
R
MULTI JOG
PUSH ENTER
MODE/SET MENU
COMPLETE CLEAR
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
OPTICAL
COAXIAL
ANALOG
MIN MAX
When reading the disc information has been completed, the
display changes as follows, and this unit becomes ready for
copying operation.
I When copying onto a CD-R or CD-RW disc without
finalization
The number of recorded tracks
I When copying onto a new CD-R or CD-RW disc
OPEN/CLOSE
1, 3
COPY REC
TRACK NO.
FINALIZE ERASE WRITE
TEXT/TIME INPUT
MODE/SET MENU
COMPLETE
CLEAR ENTER
Total recorded time
L
dB –30 –10 –6 –2 0
CD–RW
R
L
dB –30 –10 –6 –2 0
CD–RW
R
L
dB –30 –10 –6 –2 0
CD–R
R
L
dB –30 –10 –6 –2 0
CD–R
R
GROUP
GROUP
GROUP
GROUP