AT&T 1739 User Manual page 4

Feature setup
Feature summary (continued)
FEATURE
Announcement
monitor
Number
announce
Store number
Accept blocked
calls
Audible
message alert
SYSTEM
ANNOUNCEMENT
"Announcement
monitor is..."
"Number
announce is..."
"Store number
is..."
"Accept blocked
calls is..."
"Message alert
is..."
• When this feature is on, the system
will broadcast your outgoing
announcement when answering a call.
When the feature is off, your outgoing
announcement is not broadcast from
the system, but callers will hear
the announcement.
NOTE: You must set the volume to an audible
level to use this feature.
• When this feature is on, the system
announces the incoming telephone
number between the second and
third rings.
NOTE: For this feature to work, you must
subscribe to caller ID service from your
telephone service provider. There may be a fee
for this service, and it may not be available in
all areas.
• When this feature is on, the system
announces the incoming telephone
number when it plays back a message.
NOTE: For this feature to work, you must
subscribe to caller ID service from your
telephone service provider. There may be a fee
for this service, and it may not be available in
all areas.
• When this feature is off, the system
responds to blocked calls with the
default announcement, "We're sorry.
Blocked calls to this number cannot
be accepted," and hangs up without
recording a message.
NOTES:
• The system only blocks calls that are
marked PRIVATE.
• For this feature to work, you must subscribe to
caller ID service from your telephone service
provider. There may be a fee for this service,
and it may not be available in all areas.
• When this feature is on, the system
beeps every 15 seconds when there
are new messages.
3
OPTIONS