Yamaha HTR-4065 Owner's Manual page 68

Menu Item
DSP Parameter
Sound
Lipsync
Volume
Auto Power Down
ECO
ECO Mode
Input Rename
Function Dimmer
Memory Guard
IP Address
MAC Address Filter
DMC Control
Network Network Standby
Network Name
Information
Network Update
Language
Function
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D.
Panorama Enables/disables the broadening effect of the front sound field.
Center Width Adjusts the broadening effect of the center sound field.
Dimension Adjusts the difference in level between the front and surround sound fields.
Center Image Adjusts the center orientation level (broadening effect) of the front sound field.
Select Selects the method to adjust the delay between video and audio output.
Adjustment Adjusts the delay between video and audio output manually.
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume Sets the maximum volume to prevent excessive loudness.
Initial Volume Sets the initial volume for when this receiver is turned on.
Sets the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Changes the input source name displayed on the front display.
Adjusts the brightness of the front display.
Prevents accidental changes to the settings.
Configures the network parameters (such as IP address).
Sets the MAC address filter to limit access to the unit from other network devices.
Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
Selects whether to enable/disable the function that turns on the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Displays the network information on the unit.
Updates the firmware via the network.
Select an on-screen menu language.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Page
73
73
74
74
74
74
74
75
75
75
75
76
76
77
77
77
78
78
78
78
79
79
79
68
En