Yamaha HTR-3064 Owner's Manual page 44

■
Adjusting sound quality with the equalizer
Equalizer
Adjusts sound quality and tune with a graphic equalizer.
EQ Select
Turns the graphic equalizer on or off. By selecting GEQ and
pressing jENTER, you can adjust the characteristics of the
graphic equalizer.
GEQ (Default) Uses the graphic equalizer to adjust sound quality.
Off Does not activate the equalizer.
■ Adjusting the graphic equalizer
When "EQ Select" is displayed, use
1
to select "GEQ" and press jENTER.
2 Check that "Channel" appears and use
D / E
to select the speaker for which you want to
adjust the equalizer.
GEQ
Channel;FRNT L
The speaker you are adjusting
jCursor C
Press
3
frequency you want to adjust, then use
/ E
to adjust the volume.
Raising volume:
Lowering volume: Press
GEQ
63Hz
Frequency band
Frequency
range
jCursor D / E
Adjustable
range
Default setting
jCursor
Adjustment
increments
jCursor B / C
You can use
VOL.
return to step 2. Repeat steps 2-3 to adjust the tone to your
SW
C
L R
SL SR liking.
4 When you have finished making adjustments,
iSETUP
press
repeatedly to select the
jCursor D
j E.
Press Cursor
j D.
Cursor
VOL.
SW
C
L R
SL SR
Setting the volume level for
the selected frequency
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
-6.0 dB to +6.0 dB
0 dB
0.5 dB
to select another frequency or
to close the Setup menu.
Setting various functions (Setup menu)
■
Generating test tones
Test Tone
Turns the test tone generator on or off.
Off (Default) Does not generate test tones.
On Generates test tones. While "On" is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
SETUP
44
En