Yamaha HTR-3064 Owner's Manual page 43

Owners manual
Hide thumbs Also See for HTR-3064:
Table of Contents

Advertisement

Crossover
Sets the lower limit of low-frequency component output from
speakers set to "Small."
Audio with a frequency below that limit will be produced from the
J1
subwoofer or the front speakers.
40Hz
110Hz
60Hz
120Hz
80Hz (Default)
160Hz
90Hz
200Hz
100Hz
SWFR Phase
Sets the phase of the subwoofer if the bass audio is lacking or
unclear.
NRM (Default)
Does not change the subwoofer phase.
REV
Reverses the subwoofer phase.
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Off (Default)
Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
On
The subwoofer and the front speakers produce the
front channel low-frequency components.
When the "Subwoofer" is set to "None," the "Extra Bass"
setting is disabled.
J
1 :
If your subwoofer has a volume control or a crossover frequency control, set
the crossover frequency to maximum and the volume to half (or slightly less).
Controlling the volume of each speaker
Level
Separately adjusts the volume of each speaker. Use
C
to select the desired speaker and adjust the volume with
jCursor D /
E.
FL
Front speaker L
FR
Front speaker R
C
Center speaker
SL
Surround speaker L
SR
Surround speaker R
SWFR
Subwoofer
Adjustable range
-10.0 dB to +10.0 dB
Default setting
0 dB (FL / FR / SWFR)
-1.0 dB (C / SL / SR)
Adjustment
0.5 dB
increments
Setting various functions (Setup menu)
Manually setting speaker distance
Distance
jCursor B /
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
jCursor B / C
Use
to display "Unit," and then use
/ E
to choose the units of length (feet or meters).
Setting distances for each speaker
jCursor B / C
Use
to display the speaker you want to configure,
jCursor D / E
and then use
to your listening position.
Unit
Selects the distance unit (feet or meters).
Front L
Front speaker L
Front R
Front speaker R
Center
Center speaker
Sur. L
Surround speaker L
Sur. R
Surround speaker R
SWFR
Subwoofer
Adjustable range
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
Default setting
10.0 ft (3.00 m) (Front L/Front R/SWFR)
8.5 ft (2.60 m) (Center)
8.0 ft (2.40 m) (Sur. L/Sur. R)
Adjustment
0.5 ft (0.10 m)
increments
SETUP
jCursor D
to set the distance from the speaker
43
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents