How To Use Your D-Link Visualstream; Tm Camera; Setting The Focus; Capturing A Single Frame By Snapshot Button - D-Link VisualStream 300K Pixel PC Camera Manual

How To Use Your D-Link VisualStream Camera

Setting the Focus

1. Start VideoImpression.
2. Select "New. "
3. Select "Capture Video." A live preview from the video camera will appear in the window.
4. Turn the manual focus ring until the image becomes sharp.
Capturing a Single Frame using the Camera Snapshot Button
1. Start VideoImpression 1.6. (Refer to the Getting Started With VideoImpression 1.6
in this manual for instructions on working with VideoImpression 1.6)
2. Press the snapshot button located on top of the camera to capture a single frame.
Audio
Microphone

Preview

1. Follow steps 1~3 in the "Setting the Focus" section of this manual to
enable a live preview.
2. To stop the preview, click on "Stop" (
3. To resume the preview, click on "Preview" (
Snapshot
Button
).
).
8