Start-Up Guide; Content Of The Packaging; Installing The Batteries - LEXIBOOK JG6000 Instruction Manual

START-UP GUIDE

This section explains briefly how to play with the Super TV Air Jet. It is recommended to
read the complete user guide for detailed instructions on the activities and safety warnings.
1
1. Install batteries in the console: use a screwdriver to
open the battery compartment located at the back of
the console, install the 4 x LR6/AA batteries, close
back the battery compartment and tighten the screw.
Install batteries in the control Panel: use a screwdriver
to open the battery compartment located under the
speedometer. Install the 4 x LR6/AA batteries, close
back the battery compartment and tighten the screw.
2
2. Connect the console to the television. The TV set and
the Super TV Air Jet MUST BE TURNED OFF. Plug
the AV cable (yellow end) into the matching video
input jack on your TV set and the AV cable (red end)
into the matching audio input jack on your TV set.
Turn your television ON and switch to the AV Channel.
Turn ON the Control Panel and the Console. After a
moment, the menu screen should appear on the TV.
3
TV
3. Select the game leaning the sea scooter to the right or
to the left or using console keypad and press START to
start playing. For more details on the game, please go
to the game list section.
15
INTRODUCTION
Feel the sensation of real sea scooter with your Super TV Air Jet playing the 6 video
games. Please read the instructions below to learn how to use your new Super TV Air jet
and play the various games.

CONTENT OF THE PACKAGING

The packaging includes the following:
- One Super TV Air Jet
- One console
- One reparation kit
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are
not part of this toy and should be discarded for your child's safety.

INSTALLING THE BATTERIES

Your Super TV Air Jet operates with 8x 1.5V LR6/AA
4 batteries for the console and 4 batteries for the control panel.
Console:
1. Use a screwdriver to open the battery compartment
located at the back of the console.
2. Install the 4 x LR6/AA batteries observing carefully the
polarity indicated at the bottom of the battery compartment.
3. Close back the battery compartment and tighten the screw.
Control Panel:
1. Use a screwdriver to open the battery compartment
located under the speedometer.
2. Install the 4 x LR6/AA batteries observing carefully the
polarity indicated at the bottom of the battery compartment.
3. Close back the battery compartment and tighten the screw.
Do not use rechargeable batteries. Non-rechargeable
batteries are not to be recharged. Rechargeable
batteries are to be removed from the toy before being
charged. Rechargeable batteries are only to be charged
under adult supervision. Different types of batteries or
new and used batteries are not to be mixed. Only
batteries of the same or equivalent type as recommended
are to be used. Batteries are to be inserted with the
correct polarity. Exhausted batteries are to be removed
- One Air pump
- Instruction Manual
batteries (not included):
16