Denon AVR-391 Owner's Manual page 11

ENGLISH
Bass Setting
ui
1 Use to select "Bass Setting", and
then press ENTER .
Bass Setting
LFE •120Hz–
2 o p
Use to select the frequency.
LFE Set LFE signal playback range.
• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz
/ 200Hz / 250Hz
8
Remote control operation
buttons
Default settings are underlined.
3 Use ui to select "Mode", and use
o p
to select a detailed setting.
Mode :• LFE –
Mode
Select low range signals to be
reproduced by subwoofer.
• LFE : The low range signal of the channel set to
"Small" speaker size is added to the LFE signal
output from the subwoofer.
• LFE+Main : The low range signal of all channels
is added to the LFE signal output from the
subwoofer.
• "Mode" can be set when "Speaker Confi g." –
"SW" (vpage 7) is set to "Yes".
• Play music or a movie source and select the
mode offering the strongest bass.
• Select "LFE+Main" if you want the bass signals
to always be produced from the subwoofer.
NOTE
If "Front" and "Center" for "Speaker Confi g."
are set to "Large", and "Mode" is set to "LFE",
no sound may be output from the subwoofers,
depending on the input signal or selected
surround mode.
4 Press to enter the setting.
ENTER
Bass Setting
Move the cursor
(Up/Down/Left/Right)
Distance
ui
1 Use to select "Distance", and
then press ENTER .
Distance
Feet :• 1ft–
2 o p
Use to change the step (minimum
variable distance).
1ft : For changing in 1-foot steps.
0.1ft : For changing in 0.1-foot steps.
Confi rm the setting
Set up speakers
Default settings are underlined.
ui
3 Use to select a speaker, and use
o p
to select distance.
FL / FR / C / SW / SL / SR / SBLz / SBRz
Select the speaker.
zWhen the "Speaker Confi g." – "S.B(Pre)"
(vpage 7) setting is set to "None",
"SBL" and "SBR" is not displayed.
• 0.0ft – 60.0ft : Set the distance.
• The speakers that can be selected differ
depending on the "Speaker Confi g." (vpage 7)
settings.
• Default settings :
FL / FR / C / SW : 12.0 ft
SL / SR / SBL / SBR : 10.0 ft
• Set the difference in the distance between the
speakers to less than 20 ft.
NOTE
Speakers set to "None" in "Speaker Confi g."
(vpage 7) are not displayed.
4 Press to enter the setting.
ENTER
Distance
Return to previous menu