Remote Control; Presetting Stations - Aiwa CSD-TD27 Operating Instructions Manual

BAND
c PLAY
s STOP

PRESETTING STATIONS

You can preset up to 15 stations in each band.
1
Select a station.
2
Press * s STOP/MEMORY once so that
"M" is displayed to store the station.
A station is assigned a preset number, beginning
from 1 in consecutive order for each band.
Preset number
* or s on the remote control (CSD-TD66 only)
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 15
preset stations have already been stored for a
band.
To listen to preset stations
Select a band then press e PLAY/PAUSE/PRESET
repeatedly.
c PLAY on the remote control is also available (CSD-
TD66 only).
To select a preset number directly with the
remote control (CSD-TD66 only)
Press the numbered buttons 0-9 and +10.
Example:
To select number 15, press +10 and 5.
To select number 10, press +10 and 0.
To clear a preset station
Select the preset number first. Within 4 seconds, keep
s pressed until "M" and the preset number disappear
in the display.
The higher numbers in the band are decreased by one.
0-9, +10
MODE
r, t
(CSD-TD66 only)
Frequency

Remote Control

Insert two R6 (size AA) batteries.
When the reach of the remote control signal is less than
5 meters (16 feet), replace the batteries.
The remote control may not operate correctly
when:
- The unit is exposed to intense light, such as direct
sunlight
- Objects block the remote control signal to the unit
To use the buttons on the remote control
Buttons on the remote control and the main unit with
identical indications have the same functions.
To turn the power on
Press POWER to turn on the display.
When using the unit on the batteries, this button will not
turn the power on.
To turn the power off
Press POWER to turn off the display.
When one of the deck operation buttons is pressed, this
button will not turn the power off.
To use the FUNCTION button
Each time FUNCTION is pressed while the power is on,
the function is selected cyclically.
CD RADIO
* applicable when one of the deck operation buttons is
pressed
POWER
(CSD-TD66 only)
R6 (AA)
*
TAPE
FUNCTION
5
ENGLISH
En