Operation
Display board
Remote controller
TEMP
1. Unit start
Press ON/OFF button, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then
Select Auto operation
3.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
4.Unit stop
Press ON/OFF button, the unit stops.
About Auto Operation
Under the mode of auto operation, air conditioner will
automatically select Cool or Fan operation according
to room temperature.And temp.setting is disabled.
10
Auto Operation
AUTO
COOL
DRY
LOW
MED
HI
FAN
AUTO