HP A6795A Installation Manual page 9

In some systems, the A6795A adapter is limited to use in specific slots. The following table identifies these
limitations.
Table 1-1
Server Name Product Number
L1000 A5576A
L2000 A5191A
N4000 Rev. A A3639A
N4000 Rev. B A3639B
N4000 Rev. C A3639C If
upgraded from
A3639A or A3639B
NOTE rp54xx servers have slot restrictions for OLAR.
PCI slots 1 through 4 do not support OLAR.
In these servers, use PCI slots 5 through 12 for OLAR.
CAUTION The optical port protector is used only to protect the adapter port when it is not in use. Do not
use the protector as a diagnostic tool.
To install the A6795A Adapter offline (all systems except Superdome):
1. Shutdown the system.
2. Install the adapter in an available PCI slot.
3. Attach fiber cabling to the adapter. The A6795A adapter uses a fiber optic cable terminated with an LC
connector.
For additional installation instructions, see the system documentation.
Chapter 1
Supported Slots
8, 10, 12
3, 4, 5, 6, 8, 10, 12
2, 4, 6, 8, 10, 12
2, 4, 6, 8, 10, 12
2, 4, 6, 8, 10, 12
HP-UX Installation
Installing the Adapter Offline
9