SEVERIN CAFISSIMO KA 5115 Manual page 16

On/Off switch simultaneously for about 5 seconds before releasing them. The descaling
process starts.
- The selector buttons for the various types of coffee are consecutively flashing from right
to left. The pump is now forcing the descaling solution at certain time intervals into the
boiler. Completion of the descaling process is indicated by an acoustic signal. At the
same time, the selector buttons for caffè crema and espresso start flashing. Descaling will
take about 45 to 60 minutes.
Empty the collection container and place it again under the outlet opening of the
capsule-holder.
- For the flushing phase, first empty the water tank completely, and then fill it with a
minimum 0.75 litres and a maximum 1 litre of cold tap-water.
- To start the flushing phase, press any of the selector buttons for the various types of
coffee. The selector buttons start flashing consecutively from left to right. Completion of
the flushing process is indicated by two beep signals.
- Refill the water tank with cold tap-water.
- Place a suitable container under the frothing nozzle. Turn the rotary control and draw
hot water until a continuous stream of water is emitted. The appliance is now descaled
and again ready for use.
33