Tutorial: Using Scanner Software; Open Scanner Software - Kodak PROFESSIONAL RFS 3600 User Manual

Tutorial:
Using Scanner Software
There is no one 'correct' way of using the scanning software; instead, there
are many different paths, depending on your individual requirements. This
section provides one possible path, and provides an overview of software
features. For more details on each software feature refer to
Software.
This manual assumes that you are familiar with the operation of your
computer and of Adobe Photoshop, and that you have your scanner con-
nected properly to your computer as described in
to Your Computer. It also assumes that you have read and are familiar with
the material in this manual in these sections:
Precautions, Installing Scanner
Slides.
The initial sections of this part of the manual discuss how to scan a single
image. However, it is also possible to select multiple images and scan them
in a batch; the concepts involved are discussed later in
tiple Selected

OPEN SCANNER SOFTWARE

Follow the steps in this section each time that you want to use the scanner.
1. With your computer, scanner, and other devices (if present) turned off,
turn on the scanner by pressing the on (|) end of the power switch on
the back of the scanner. The light on the top of the scanner turns on.
The scanner performs a start-up procedure and then is ready for use.
CAUTION: If you are using a SCSI connection for the scanner, always
3 3 3 3 3
turn on the scanner before you turn on your computer.
Software, and
Images.
29
Reference –
Connecting the Scanner
Important Safeguards and
Loading Filmstrips and
Working with Mul-