Using The Command Dial For Rapid Setting Changes - Kodak P880 ZOOM User Manual

Using exposure compensation with exposure bracketing
In PAS modes, you can use exposure compensation in conjunction with exposure
bracketing.
If exposure
compensation is
set to
0.0
+1.0
–1.0

Using the command dial for rapid setting changes

Use the Command dial in combination with other buttons for rapid setting changes.
NOTE: The Command dial is also used to adjust manual settings in PASM modes, see
page 39.
Function buttons that provide rapid setting changes:
• Flash button
• Focus button
• Drive button
• ISO button
www.kodak.com/go/support
And if the exposure
bracketing interval is
set to 3 steps
Interval is set to 0.3
(page 37)
(page 29)
(page 30)
(page 41)
Doing more with your camera
Then the exposures taken
are
–0.3, 0.0, +0.3
+0.7, +1.0, +1.3
–1.3, –1.0, –0.7
Command dial
•
Hold the Function button and
rotate the Command dial to
rapid ly scroll through and select
an option in the function menu.
•
Release the Function button
to close the menu.
• Exposure metering button
• Program button
• White balance button
• Digital zoom button
(page 42)
(page 35)
(page 40)
(page 9)
43