Changing your frame orientation
Your frame is set up to display pictures in landscape
stand to change it to portrait
Mounting your frame on the wall
Use 3 mm (1/8 inch), or larger, wall-anchoring hardware (not included) to anchor your
frame securely to your wall.
Secure power cable
with attached clip
www.kodak.com/go/support
but you must also change the setting.
Change the stand position:
Remove the stand, turn it 90
page
1).
Change the setting:
1 Tap
(Home)
2 Slide to highlight (Viewing options), then tap OK.
3 Slide to highlight Frame orientation, then tap OK.
4 Slide to highlight Portrait, then tap OK.
5 Tap
to exit.
Getting started
orientation. You can turn the
°
, and replace as shown (see
→
(Settings).
Wall mounting holes
(on back of frame)
To change to portrait
your frame 90° and use the
wall mounting holes at the top.
, turn
7