Charging Batteries; Initial Setup - Kodak DCS 720X Quick Setup Manual

Charging Batteries

You will need to charge a battery before using it
for the first time, then whenever it is low.
1
Plug the cable
from the
charger's AC
adapter into
the battery
charger jack.
2
Select the
power cord
with the universal plug that is appropriate for
your area.
3
Insert the appropriate end of the power cord
into the receptacle on the rear of the charger
AC adapter.
INITIAL
SETUP
4
Plug the power cord into a wall outlet.
5
Insert one or two batteries into the slots on the top
of the battery charger. (For one battery, you can
use either slot).
On average, the charger will completely charge a
battery in approximately one hour. If two
batteries are inserted, it will charge them
simultaneously.
6
Remove the battery or
batteries from the
charger when the
lights on the charger
turn green.