Pcipnp Configuration; Super Io Configuration - ASROCK P43 PRO USB3 User Manual

3.4.5 PCIPnP Configuration

3.4.5 3.4.5 PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration
3.4.5 3.4.5 PCIPnP Configuration
BIOS SETUP UTILITY
Advanced
Advanced PCI / PnP Settings
PCI Latency Timer
PCI IDE BusMaster
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards' specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.
3.4.6

3.4.6 Super IO Configuration

3.4.6 Super IO Configuration Super IO Configuration Super IO Configuration
3.4.6 3.4.6 Super IO Configuration
BIOS SETUP UTILITY
Advanced
Configure Super IO Chipset
[3F8 / IRQ4]
Serial Port Address
Infrared Port Address [Disabled]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it.
Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],
[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.
Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].
Value in units of PCI
clocks for PCI device
latency timer
[32]
register.
[Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Allow BIOS to Enable
or Disable Floppy
Controller.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
4 7 4 7 4 7
4 7 4 7