Driver Installation Guide; Installing Windows ® 7 / 7 64-Bit / Vista; Tm Tm; Xp / Xp 64-Bit Without Raid Functions - ASROCK P43 PRO USB3 User Manual

2.13 Driver Installation Guide

2.13 2.13 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.13 2.13 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.14 Installing Windows 2.14 2.14 Installing Windows Installing Windows Installing Windows
2.14 2.14 Installing Windows
Vista Vista Vista Vista Vista 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
TM TM TM TM TM
If you want to install Windows
OS on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.14.1 2.14.1 2.14.1 2.14.1 2.14.1 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Functions Functions
Functions Functions Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ function (AHCI mode)
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
All data in the disk will be destroyed,
proceed? [Y/N]
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® ® ® ® ®
7 / 7 64-bit / Vista / Vista
® TM
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ®
XP / XP 64-bit OS on your SATA / SATAII HDDs
®
Advanced screen Storage Configuration.
2 8 2 8 2 8
2 8 2 8
/ / / / /
TM TM TM TM TM
64-bit / XP / XP 64-bit
TM