Cpu Configuration - ASROCK P43 PRO USB3 User Manual

3.4.1 CPU Configuration

3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration
3.4.1 3.4.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Boot Failure Guard
[Enabled]
Boot Failure Guard Count [3]
Spread Spectrum [Auto]
Enhanced Halt State [Disabled]
Intel (R) Virtualization tech. [Enabled]
CPU Thermal Throttling [Enabled]
No-Execute Memory Protection [Disabled]
Intel (R) SpeedStep (tm) tech. [Auto]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Spread Spectrum
This item should always be [Auto] for better system stability.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
Intel (R) Virtualization tech.
When this option is set to [Enabled], a VMM (Virtual Machine Architecture)
can utilize the additional hardware capabilities provided by Vanderpool
Technology. This option will be hidden if the installed CPU does not support
Intel (R) Virtualization Technology.
CPU Thermal Throttling
You may select [Enabled] to enable P4 CPU internal thermal control mecha-
nism to keep the CPU from overheated.
No-Excute Memory Protection
No-Execution (NX) Memory Protection Technology is an enhancement to
the IA-32 Intel Architecture. An IA-32 processor with "No Execute (NX)
Memory Protection" can prevent data pages from being used by malicious
software to execute code. This option will be hidden if the current CPU
does not support No-Excute Memory Protection.
Enable or disable the
feature of Boot
Failure Guard.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
3 8 3 8 3 8
3 8 3 8