ASROCK N68-GS3 UCC - V1.0 User Manual page 33

Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main OC Tweaker Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
CPU Frequency Multiplier
Processor Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
Processor Voltage
It allows you to adjust the value of processor voltage. However, for safety
and system stability, it is not recommended to adjust the value of this item.
NB Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
HT Bus Speed
This feature allows you selecting Hyper-Transport bus speed. Configura-
tion options: [Auto], [x1 200 MHz] to [x5 1000 MHz].
HT Bus Width
This feature allows you selecting Hyper-Transport bus width. Configura-
tion options: [Auto], [8 Bit] and [16 Bit].
Unlock CPU Core
UCC (Unlock CPU Core) feature simplifies AMD CPU activation. As long as a
simple switch of the BIOS option "Unlock CPU Core", you can unlock the
extra CPU core to enjoy an instant performance boost. When UCC feature
is enabled, the dual-core or triple-core CPU will boost to the quad-core
CPU, and some CPU, including quad-core CPU, can also increase L3 cache
size up to 6MB, which means you can enjoy the upgrade CPU performance
with a better price. Please be noted that UCC feature is supported with
AM2+ / AM3 CPU only, and in addition, not every AM2+ / AM3 CPU can
support this function because some CPU's hidden core may be
malfunctioned.
H/W Monitor Boot Security
Overclocking may cause
damage to your CPU and
[Auto]
motherboard.
[200]
It should be done at
[100]
your own risk and
[Enabled]
expense.
[Enabled]
[Enabled]
[Enabled]
x15.0 3000 MHZ
x10.0 2000 MHZ
Select Screen
1.4250 V
Select Item
[Manual]
Enter Go to Sub Screen
[x0.5 100 MHz]
F1 General Help
[0.6000 V]
F9 Load Defaults
F10 Save and Exit
ESC Exit
3 3 3 3 3 3 3 3 3 3
Exit